If your Smart TV Samsung Crystal UHD 43” TU8002 works very slow, it hangs, or you have a full memory and you want to erase everything, or you want to sell it or give it away and you want nobody to be able to access your history and passwords you can do a factory reset or format so that it returns to be like the first day.
IMPORTANT: formatting or resetting your Samsung Crystal UHD 43” TU8002 to its factory state it will delete all the personalized settings of the TV such as the tuned channels and their order, names of inputs, applications that have been installed, passwords of the accounts linked to this Crystal UHD 43” TU8002, Wi-Fi passwords, usuario de Samsung y Smart Hub y el historial de navegación web.
The Samsung Crystal UHD 43” TU8002 TV will need to be fully configured as when it was turned on for the first time after purchase.
Estimated time: 15 minutes.
Table of Contents:
You will need:
- TV remote
If you don't have a remote you can buy one from this link on Amazon. *
Models from 2018:
1- First step:
First go to the home menu of your Samsung Crystal UHD 43” TU8002 TV by pressing the "Menu" or "Home" button on the remote control or remote control of the Smart TV, it is the button with the image of a house.
2- Second step:
Using the directional buttons on the remote control, navigate through the home menu of Crystal UHD 43” TU8002 until you find the section called "Settings", it is the option with the icon of a gear or cogwheel.
Press the center button on the remote control to open the TV settings.
3- Third step:
With the directional buttons of your remote control, scroll down the Crystal UHD 43” TU8002 menu to the section called "General", this is the option with an icon of a wrench.
4- Four step:
Using the directional buttons on the Samsung Crystal UHD 43” TU8002 remote control, scroll down the menu that appears on the screen to the section called "Reset" and press the enter button (the button located in the center of the steering wheel).
5- Fifth step:
A window will appear asking for the PIN code. If you have never changed the Samsung Crystal UHD 43” TU8002 PIN code, enter 0000
which is the default PIN code for all Samsung televisions.
6- Sixth step:
A confirmation message will appear on the Samsung Crystal UHD 43” TU8002 screen indicating that all the information on the Crystal UHD 43” TU8002 TV will be erased, including the settings, installed applications except the network settings.
Press Yes to confirm the TV reset.
7- Seventh step:
Wait a few minutes for the hard reset of the Samsung Crystal UHD 43” TU8002 to complete, do not touch any button on the remote control or turn off or unplug the TV until it is finished.
8- Eighth step:
Once the data deletion process is completed from the Samsung Crystal UHD 43” TU8002 and the factory settings have been restored, the TV will restart automatically and the initial setup menu will appear.
If you don't have the Samsung Crystal UHD 43” TU8002 remote control, your TV has entered a reboot loop or is unresponsive, you can factory reset your Samsung using the physical buttons on the back, bottom, or side of the TV.
1- First of all, locate the power, volume up and volume down buttons of the Samsung Crystal UHD 43” TU8002.
They must be located on the back of the TV, on its right side or at the bottom of the Samsung screen.
2- Next, disconnect the Samsung Crystal UHD 43” TU8002 from the electrical current, unplug it or turn off the switch of the strip where it is connected to leave it without electricity.
3- Hold down the power button on the Samsung Crystal UHD 43” TU8002 for about 15 seconds and release the button again.
4- Reconnect the Samsung Crystal UHD 43” TU8002 TV to power and press the power button.
5- The Samsung Crystal UHD 43” TU8002 TV will restart and it will take a few minutes or seconds to restore to factory settings, once restored you will have to reconfigure it, choosing the language, internet connection, tuning channels, installing applications or configuring Bluetooth devices.
Has it been useful?
About the device:
The Samsung Crystal UHD 43” TU8002 it is a television with the Tizen operating system, 3 HDMI ports, a screen resolution of 3840 x 2160 pixels, a screen diagonal of 109.2 cm, Bluetooth, Wi-Fi, Ethernet port (RJ45), dimensions of 0 cm width, 0 cm height and 0 cm depth.
Release date: 2020-10-08.
There are no questions yet about "How to reset Samsung Crystal UHD 43” TU8002 - Factory reset and erase all data", you can write the first one.
* Some of the links in this article are affiliates, which means that when you buy one of those products we will receive a small commission that will allow us to continue offering quality and updated content, and it will not cost you anything since you will continue paying the same price.